Customization: | Available |
---|---|
Type: | Basic Diesel Generator |
Installation Method: | Fixed |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1000kw Container diesel Generator Specification of genset | ||||||||
Gensets model | WTC1000GF | |||||||
Prime power | 1000KW | |||||||
Rated Voltage | 400V | |||||||
Rated frequency(HZ) | 50 | |||||||
Rated Speed | 1500rpm | |||||||
Power Factor | 0.8(lagging) | |||||||
Genset Weight(kg) | 9500 | |||||||
Dimensions(mm) (L× W× H) | 4350× 2100× 2500 | |||||||
2. Specification of diesel engine | ||||||||
Engine brand | Cummins | |||||||
Engine model | KTA38-G9 | |||||||
Number of Cylinders | 12 | |||||||
Cylinder arrangement | 60° V | |||||||
Cycle | Four stroke | |||||||
Aspiration | Turbocharged and Aftercooled | |||||||
Bore× Stroke (mm× mm) | 159 x 159 | |||||||
Displacement (Liter) | 37.8 | |||||||
Compression Ratio | 13.9: 1 | |||||||
Speed Governor | Electrical | |||||||
Cooling System | Forced Water Cooling Cycle | |||||||
Speed Stability (%) | ≤ 1% | |||||||
Total lubrication system capacity (L) | 135 | |||||||
Fuel Consumption at 100% Load | 199g/kWh | |||||||
Starting Method | DC24V Electrical starting | |||||||
3. Specification of alternator | ||||||||
Alternator brand | Engga | |||||||
Alternator model | EG400L-1000N | |||||||
Number of Phase | 3 | |||||||
Connecting Type | 3 Phase and 4 Wires | |||||||
Number of Bearing | 1 | |||||||
Protection Grade | IP21 | |||||||
Exciter Type | Brushless, Self-exciting, AVR automatic voltage regulating, 100% Copper winding wire | |||||||
Insulation Class | H | |||||||
Telephone Influence Factor (TIF) | ≤ 50 | |||||||
THF | ≤ 2% | |||||||
Voltage Regulation, Steady State | ≤ ± 1% | |||||||
Transient State Voltage | ≤ -15%~+20% | |||||||
4. Specification of AMF Control Panel (with LCD controller) | ||||||||
The control panel is AMF control panel, with the display of voltage, current, frequency, water temperature, oil pressure. The genset with low oil pressure, high water temperature, over speed, over load protection function. | ||||||||
The features of KAIXUN controller: | ||||||||
it is a new generation Automatic control module for single Genset, which adopts bran-new outline configuration, focus on the requirements of customers, and perfectly improves the performance of controller. It fully meets the auto control requirements of different kinds of Genset for user or special assembly factory. |
||||||||
The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD and LED' s. |